ABB IRB 14000 - Page 162

NoteAction
Tighten the set screw.4
Screw: M3-set screw (1 pc).Axis 1, axis 2, axis 3 and axis 7.
Tightening torque: 0.6 Nm.
xx1500000518
Screw: M2-set screw (2 pcs).Axis 4, axis 5 and axis 6.
Tightening torque: 0.2 Nm.
xx1500001648
Remove the fixture.5
Continues on next page
162 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.4.2 Replacing the axis-2 motor
Continued