ABB IRB 14000 - Connecting a PC and Ethernet Based Options; Multiple Ethernet Based Options

2.4.3 Connecting a PC and Ethernet based options
Introduction
The following connectors on the interface on the left side panel of the controller
are directly connected to the Ethernet ports of the IRC5 main computer.
For more information about the functionality of each connector, see Connectors
on the computer unit on page 93.
xx1400002129
ServiceXP23
WAN (connection to factory WAN).XP28
LAN2 (connection of Ethernet based options).XP25
LAN3 (connection of Ethernet based options).XP26
USB port to main computerXP24
Multiple Ethernet based options
For IRB 14000 it is possible to use both the options PROFINET Controller/Device
(888-2) and EtherNet/IP Scanner/Adapter (841-1) at the same time.
Continues on next page
92 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
2 Installation and commissioning
2.4.3 Connecting a PC and Ethernet based options