ABB IRB 14000 - Risk of Disabling Function Reduced Speed 250 MM;S

1.2.5.5 Risk of disabling function "Reduced speed 250 mm/s"
Note
Do not change Transm gear ratio or other kinematic system parameters from
the FlexPendant or a PC. This will affect the safety function "Reduced speed 250
mm/s".
36 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
1 Safety
1.2.5.5 Risk of disabling function "Reduced speed 250 mm/s"