ABB IRB 14000 - USB Ports

Note
For more information and examples of connecting to different networks, see
Application manual - EtherNet/IP Scanner/Adapter or Application
manual - PROFINET Controller/Device.
USB ports
The USB ports are intended for connecting USB memory devices.
Note
It is recommended to use the USB ports USB
1
and USB
2
on the X10 connector
for connecting USB memory devices.
The USB ports on the X11 connector are intended for internal use.
96 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
2 Installation and commissioning
2.4.3.1 Connectors on the computer unit
Continued