ABB IRB 14000 - Inspecting, Signal Lamp

3.3.2 Inspecting, signal lamp
Location of signal lamp
The signal lamp is located as shown in this figure.
xx1500000051
Required tools and equipment
NoteArt. no.Equipment, etc.
To be replaced if damage is detected.3HAC053350-001Signal lamp
Content is defined in section Stand-
ard toolkit on page 449.
-Standard toolkit
Inspecting, signal lamp
Use this procedure to inspect the function of the signal lamp.
NoteAction
Verify that the signal lamp is lit when motors are put
in operation ("MOTORS ON").
1
Continues on next page
Product manual - IRB 14000 115
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
3 Maintenance
3.3.2 Inspecting, signal lamp