5-104 CELL-DYN 3000 System Operator’s Manual
9140240E — May 1995
Operating Instructions Chapter 5
The [PREVIOUS SPECIMEN] key is used to display the results for the
sequence number preceding the one currently displayed without
returning to the main DATA LOG Screen.
The [NEXT SPECIMEN] key is used to display the results for the
sequence number following the one currently displayed without
returning to the main DATA LOG Screen.
The [EDIT SPECIMEN] key is used to edit patient demographic
information for the selected record. It may also be used to edit and
display the results with a Parameter or Patient Limit set different from
the one currently displayed. The following soft key labels are displayed
when the [EDIT SPECIMEN] key is pressed:
CONFIRM
CANCEL
These keys are used to confirm or cancel the edits. The Bulletin line
displays the message PRESS CONFIRM TO SAVE CHANGES OR
CANCEL TO CANCEL CHANGES. When the [CONFIRM] key is
pressed, the edited record is displayed.
The [CUSTOMIZE REPORT] key is used to customize the DATA
STATION RUN Screen display, header and printout as described in the
Set Up Instructions section of this chapter.
The [TRANSMIT SPECIMEN] key is used to transmit the displayed
report to a Laboratory Information System or on-line computer.
The [PRINT TICKET] key is used to print a ticket (in the currently
selected format) for the displayed record.
The [PRINT REPORT] key is used to print a graphics report (in the
currently selected format) at the displayed record.
The [RETURN] key is used to return to the main DATA LOG Screen.
PREVIOUS
SPECIMEN
NEXT
SPECIMEN
EDIT
SPECIMEN
CUSTOMIZE
REPORT
TRANSMIT
SPECIMEN
PRINT
TICKET
PRINT
REPORT
RETURN
To Next Page
Loading...
