ADCMT 6240B User Manual

6240B DC Voltage Current Source/Monitor Operation Manual
6.7.3 Remote Command List
6-37
GPIB SRQ S0 ON
*5
S1 OFF
S? Response: S0 or S1
Status *STB? Query of the Status Byte Register (STB)
Response: ddd
*SRE Sets the Service Request Enable Register (0 to 255).
0*6
*SRE? Response: ddd
*ESR? Query of the Standard Event Status Register (ESR)
Response: ddd
*ESE Sets the Standard Event Status Enable Resister (0 to
255).
0*6
*ESE? Response: ddd
DSR? Query of the Device Event Status Register (DSR)
Response: ddddd
DSE Sets the Device Event Status Enable Register (0 to
65535).
0*6
DSE? Response: ddddd
ERR? Query of the Error Register (ERR).
Response: ddddd
*CLS Status clear
Operation
Complete
*OPC After all operations are complete, sets LSB of the Stan-
dard Event Status Register.
*OPC? Response: 1 (after all operations completed)
*WAI Waits until all operations are complete (GPIB only).
*5: Not initialized by the RINI command.
*6: Not initialized by the RINI or *RST command.
Item Command Description
Default Operation
Power ON
Factory
shipment
DC/pulse
OPR/SUS
Sweep
OPR/SUS

ADCMT 6240B Specifications

General

Brand	ADCMT
Model	6240B
Category	Measuring Instruments
Language	English