ADCMT 6240B User Manual

6240B DC Voltage Current Source/Monitor Operation Manual
9.1 Source and Measurement
9-6
Output noise: For voltage source, within the range from no load to the maximum load [Vp-p]
For current source, at the following load [Ap-p]
Switching noise:
Range Load resistance
Low frequency noise
High frequency
noise
DC to 100 Hz DC to 10 kHz DC to 20 MHz
Voltage source 300 mV - 50 V 200 V3 mV
3 V - 50 V 300 V3 mV
15 V - 500 V2 mV 4 mV
Current source 30 A10 k 10 nA 60 nA 500 nA
300 A10 k 30 nA 150 nA 600 nA
3 mA 1 k 200 nA 2 A6 A
30 mA 1 k 2 A15 A 20 A
300 mA 1 k 20 A 100 A 150 A
1 A 10  500 A 1 mA 10 mA
4 A 10  500 A 1 mA 10 mA
Typical value [p-p] Load resistance
Output ON/OFF noise Voltage source 600 mV At 100 k
Current source 600 mV At 100 k
Range switching noise Voltage source 50 mV -
Current source fast: 100 digits+50 mV
*5
-
slow: 300 digits+50 mV
*5
-
Voltage measurement/limiter 50 mV
*6
-
Current measurement/limiter 50 mV
*6
-
Response switching noise - 80 mV -
Power OFF noise - 600 mV At 100 k
*5: "digits" indicates current source 4
1
/
2
digit values. Double these values in the 4 A range.
*6:
The limiter is inactive. While the limiter is active, it is the same as the current source range switching noise.

ADCMT 6240B Specifications

General

Brand	ADCMT
Model	6240B
Category	Measuring Instruments
Language	English