ADCMT 6240B - Page 85

6240B DC Voltage Current Source/Monitor Operation Manual
2.2.8 Random Sweep Source
2-49
11. Press 123..., 2, and ENTER in order.
The stop address is set to 2.
Setting the time
12. Press , and in order to select D) TIME.
13. Press to select 1) Hold Time. Press to enter the Input/Run level.
14. Press 123..., ., 0, 0, 1 and ENTER in order.
The hold time is set to 1 ms.
15. Press , and in order to select 3) Meas Delay. Press to enter
the Input/Run level.
16. Press 123..., 0, ., 0, 5 and ENTER in order.
The measurement delay time is set to 0.05 ms.
17. Press , and in order to select 5) Period. Press to enter the
Input/Run level.