Save page
93
The Save Multiple Programs popup window will appear, allowing you to select the pro-
grams that you want to save.
A Replace same programs field
Specifies what will be done if an identically-named program file exists in the save-desti-
nation.
B Save field
Specifies whether to save only programs, or samples and programs.
C Replace same samples field
Specifies what will be done if an identically-named sample file exists in the save-desti-
nation.
D [F1] key (CANCEL)
Cancels the operation and closes the popup window.
E [F3] key ( TAGGED)
Saves only the tagged programs, and closes the popup window.
F [F4] key (MODIFY)
Saves only the programs indicated by the * symbol, and closes the popup window.
G [F6] key (ALL)
Saves all programs, and closes the popup window.
12. Move the cursor to each field, and make the desired settings.
The contents of each field are the same as when saving a single multi.
13. According to the type of programs you want to save, press one of the [F3] (
TAGGED)–[F6] (ALL) keys.
The selected programs will be saved in the same level of the storage device.
■ Saving multis
Here’s how to save one or more multis from memory to a storage device.
1. In the Save page, move the cursor to the Type field and turn the [JOG] dial to
select SAVE MULTIs.
The data list block will change to a display like the following.
A Multi list field
Lists the multis that are in internal memory.
4 5 6 7
1
2
3
2 3 4
1
To Next Page
Loading...
Need help?
General
