Akai MPC 4000 User Manual

TR list/PARAMS page
35
TR list/PARAMS page
Listing the track parameters
Here you can view a list of settings such as transpose and duration for each track in the
currently selected sequence.
To access this page ....... [MAIN] key → [F2] key (TR LIST) → [F4] key
(PARAMS)
A Track list block
Functions
• [F1] key (MAIN)
Displays the Main page.
• [F2] key (OUT 1)
Displays the TR List/Out 1 page.
• [F3] key (OUT 2)
Displays the TR List/Out 2 page
• [F5] key (MUTE)
Mutes the currently selected track.
• [F6] key (SOLO)
Solos the track that is selected in the track list.
Track list block
This lists the tracks in the currently selected sequence.
A Pgm field
Displays the program change on/off status.
The Program change popup window will appear if you press the [WINDOW] key.
B Trans field
Specifies the transposition for each track. Changing this value will not affect the events
recorded in the track.
The Transpose Permanent popup window will appear if you press the [WINDOW] key.
1
1234

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)