Main page
17
D [F3] key (PARAMS)
Copies only settings such as the number of measures in the sequence, and the time sig-
nature. The MIDI events will not be copied.
E [F5] key (DO IT)
Executes the copy.
3. Move the cursor to the Copy source field, and turn the [JOG] dial to select the
copy-source sequence.
4. Move the cursor to the Copy destination field, and turn the [JOG] dial to select
the copy-destination sequence.
As the copy-destination, you may select a sequence in which MIDI events have already
been recorded. In this case, executing the copy will cause the copy-destination sequence
to be overwritten (replaced) by the copy-source sequence.
5. To execute the copy, press the [F5] key (DO IT).
■ Deleting a sequence
Here’s how to delete a specific sequence in memory. Once you delete a sequence, that
sequence cannot be recovered to its original state. Please use this operation with caution.
1. Move the cursor to the Seq field.
2. Press the [WINDOW] key.
The Sequence popup window will appear.
3. Press the [F4] key (DELETE).
The Delete Sequence popup window will appear.
A Delete sequence field
Selects the sequence that you want to delete.
B [F1] key (CANCEL)
Cancels the operation and closes the popup window.
C [F3] key (DEL ALL)
Opens the Delete ALL Sequence popup window, which lets you delete all sequences
from the memory of the MPC4000. When this popup window is displayed, you can press
the [F6] key (DO IT) to delete all sequences.
D [F6] key (DO IT)
Deletes the specified sequence.
4. Move the cursor to the Delete Sequence field, and turn the [JOG] dial to select
the sequence that you want to delete.
5. To delete the sequence, press the [F6] key (DO IT).
The deleted sequence will return to a blank state.
1
23 4
To Next Page
Loading...
Need help?
General
