EasyManuals Logo

Akai MPC 4000 User Manual

Akai MPC 4000
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
Global page
113
Global mode
Global page
Making overall settings for the MPC4000
Here you can make settings that affect the operation of the entire MPC4000, such as
adjusting the master tuning, making word clock settings, and setting the internal clock.
To access this page ....... [GLOBAL] key
A Global block
B Word clock block
Functions
[F2] key (MEMORY)
Displays the Memory page.
[F3] key (CONFIG)
Displays the Configuration page.
[F4] key (FOOT SW)
Displays the Foot Switch page.
[F6] key (INITIAL)
Opens the Initialize ALL parameters popup window, where you can return the MPC4000
to its factory-set condition.
Global block
Here you can make settings that apply to the entire MPC4000, such the master level, mas-
ter tune, SCSI ID, and internal clock.
A Master Level field
Sets the master level of the MPC4000 in a range of –42 dB–0 dB.
B Master tune field
Sets the master tuning of the MPC4000. You can adjust the tuning in a range of
–36.00–0–+36.00 semitones, in steps of semitones or cents.
C Date field
Displays the date of the internal clock. When you turn the [JOG] dial or press the [WIN-
DOW] key, the Set Date/Time popup window will appear.
2
1
1
2
3
4
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akai MPC 4000 and is the answer not in the manual?

Akai MPC 4000 Specifications

General IconGeneral
Polyphony64 voices
RAM272 MB (expandable to 512 MB)
Pads16 velocity and pressure-sensitive pads
MIDI2 MIDI inputs, 4 MIDI outputs
Sampling Frequency44.1 kHz
Display240x64 backlit LCD
Effects4 internal effects processors
StorageInternal Hard Drive
Sequencer300, 000 notes capacity
FilterMulti-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)

Related product manuals