Akai MPC 4000 User Manual

Locate popup window
249
Assign locate keys block
Here you can change the functions that are assigned to the STEP [ < ]/[ > ] keys and BAR
[
<< ]/[ >> ] keys etc. of the transport section.
A <STEP field
Changes the function assigned to the STEP [
< ] key. The factory setting is <STEP.
B STEP> field
Changes the function assigned to the STEP[
> ] key. The factory setting is STEP>.
C EVENT field
Changes the function assigned to the [GO TO] key + STEP[
< ] key. The factory setting
is <EVENT.
D EVENT field
Changes the function assigned to the [GO TO] key + STEP[
> ] key. The factory setting
is EVENT>.
E <<BAR field
Changes the function assigned to the BAR[
<< ] key. The factory setting is <BAR.
F BAR>> field
Changes the function assigned to the BAR[
>> ] key. The factory setting is BAR>.
G START field
Changes the function assigned to the [GO TO] key + BAR[
<< ] key. The factory setting
is START.
H STOP field
Changes the function assigned to the [GO TO] key + BAR[
>> ] key. The factory setting
is STOP.
I Event field
Selects the events by which you will step when changing the current location in steps of
an event.
ALL........................All events will be used.
NOTE ONLY..........Only note events will be used.
1
3
256
748
9

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)