Akai MPC 4000 User Manual

Edit page
139
Edit page
Editing the effect parameters
Here you can edit the parameters of the effect type used by each effect 1–4.
To access this page ....... [EFFECT] key → [F2] key (EDIT)
A Fx block
B Parameter block
Functions
• [F1] key (SELECT)
Displays the Select page.
• [F3] key (MIX)
Displays the Mix page.
• [F6] key (ON/OFF)
Switches the effect on/off.
Fx block
Here you can select the effect whose parameters you want to edit.
A Fx field
Selects the effect whose parameters will be edited.
B Type field
Indicates the effect type for the effect selected in the Fx field. (You can also change the
effect type here.)
Parameter block
Here you can edit the parameters of the effect type for the selected effect 1–4.
A Block diagram
Displays a block diagram of the effect type you are editing.
B Parameter fields
Displays the parameters of the effect type. Details on the parameters provided for each
effect type are given in the Effect type/parameter list.
1
2
1 2
1
2
3
4

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)