Akai MPC 4000 User Manual

MIDI mode
82
Event page
Monitoring MIDI events
Here you can view a list of MIDI events for the specified channel.
To access this page........[MIDI] key → [F3] key (EVENT)
A MIDI event monitor block
Functions
• [F1] key (ROUTING)
Displays the Routing page.
• [F2] key (FILTER)
Displays the Filter page.
• [F6] key (CLEAR)
Clears the list display.
MIDI event monitor block
This displays a list of the MIDI events that are being transmitted or received on the spec-
ified channel.
A MIDI monitor field
Selects one of the following as the MIDI connector/port whose MIDI events will be mon-
itored.
MIDI IN I...............[MIDI IN I] connector
MIDI IN II..............[MIDI IN II] connector
MIDI OUT-A .........[MIDI OUT A] connector
MIDI OUT-B..........[MIDI OUT B] connector
MIDI OUT-C..........[MIDI OUT C] connector
MIDI OUT-D .........[MIDI OUT D] connector
INT-A.....................Virtual MIDI port A of the sampler section
INT-B .....................Virtual MIDI port B of the sampler section
1
3
12

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)