Load page
105
■ Loading an individual sequence
Here’s how to load an individual sequence file from a storage device into internal mem-
ory.
1. Access the Load page, and move the cursor to the Disk field.
2. Turn the [JOG] dial to open the Disk List popup window.
3. Move the cursor to the storage device from which you want to load the
sequence, and press the [F6] key (SELECT).
The load-source storage device will be selected.
4. Move the cursor to the view block, and turn the [JOG] dial to select
SEQUENCE.
5. Move the cursor to the file list block, and select the sequence file that you want
to load.
6. Press the [F6] key (DO IT).
The Load a Sequence popup window will appear.
A Sequence list
Selects the sequence number into which the data will be loaded.
B [F1] key (CLOSE)
Closes the popup window.
C [F5] key (DO IT)
Loads the data.
7. Move the cursor to the sequence number, and turn the [JOG] dial to select the
sequence number (within the MPC4000) into which the selected sequence file
will be loaded.
If you select a sequence number in which events have already been recorded, that data
will be overwritten.
8. To load the data, press the [F5] key (DO IT).
The sequence will be loaded, and the popup window will close.
■ Loading samples
Here’s how to load one or more sample files from a storage device into internal memory.
1. Access the Load page, and move the cursor to the Disk field.
2. Turn the [JOG] dial to open the Disk List popup window.
3. Move the cursor to the storage device from which you want to load data, and
press the [F6] key (SELECT).
The load-source storage device will be selected.
4. Move the cursor to the view block, and turn the [JOG] dial to select SAMPLE.
Only sample files will be displayed in the file list block.
2
3
1
To Next Page
Loading...
Need help?
General
