Akai MPC 4000 User Manual

Mix page
131
■ Assigning a program to each part
Here’s how to assign a program to each part of the multi.
1. In the Mix page, move the cursor to the Program/Type field and turn the [JOG]
dial.
The Program List popup window will appear.
A Program/Type field
Shows the programs in memory and their types.
B Prog.No. field
Indicates the program change number assigned to that program.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F6] key (SELECT)
Confirms the program selection.
2. Turn the [JOG] dial to select the program that you want to assign.
3. To finalize the program, press the [F6] key (SELECT).
The popup window will close.
Hint: Programs can also be assigned in the MIDI page or Span page.
43
21

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)