The Q-LINK function
232
Q-Link sequence page
Recording and playing movements of the Q-LINK knobs and sliders
You can record the movements of the Q-LINK knobs and sliders in a dedicated step
sequencer, and play them back in synchronization with a sequence or song.
To access this page........[SEQUENCE] key → [F1] key (KNOB) (to record
knob values)
[SEQUENCE] key → [F2] key (SLIDER) (to record
slider values)
A Sequence block
B Setting block
Functions
• [F1] key (KNOB)
Displays the Q-LINK Sequence page in which you can record knob positions.
• [F2] key (SLIDER)
Displays the Q-LINK Sequence page in which you can record slider positions.
• [F3]–[F6] keys (ON/OFF)
Switches Q-LINK sequence playback on/off for each knob/slider.
Sequence block
A Seq field
Selects the sequence in which these Q-LINK sequence settings will be registered.
B Step field
Selects the length of each step in the Q-LINK sequence, from a range of 1/4, 1/8, 1/16,
1/32, or 1/64. For example if you select 1/64, each step of the Q-LINK sequence will cor-
respond to a 64th note of the sequence or song. Similarly if you select 1/16, each step of
the Q-LINK sequence will correspond to a 16th note of the sequence or song.
Hint: Q-LINK sequence settings are stored within a sequence of the sequencer section. If you want to
keep your settings, you must store the sequence from internal memory onto an external storage device.
1
2
1
2
1
2
To Next Page
Loading...
Need help?
General
