Akai MPC 4000 User Manual

Current page
245
If a drum program is selected
A
Note field
Shows the note number/note name assigned to each pad by this drum program. You can
move the cursor to this field and change the note number.
B
Sample field
Shows the sample that is assigned to each pad by this drum program. You can move the
cursor to this field and change the sample.
C
GM field
Shows the GM (General MIDI) drum set instrument name that corresponds to the note
number assigned to this pad. Changing the note number will automatically change the
display of this field.
If a key group program or external MIDI channel is selected
A
Note field
Shows the note number/note name assigned to each pad. You can move the cursor to this
field and change the note number.
B
GM field
Shows the GM (General MIDI) drum name of the note number assigned to the pad.
Changing the note number will automatically change the display of this field.
Note: If the Global pad assign field is set to CHROMATIC, modifying the note number in the Note
field for any pad will shift the note numbers of all pads upward or downward. (This has the same effect
as the Transpose function.)
3
1
2
1
2

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)