Record mode
162
C
Effect field
Switches each effect on/off.
D
[F1] key (CLOSE)
Finalizes the settings and returns to the previous page.
E
[F5] key (EDIT)
Accesses the Effect mode Edit page.
The available effect types and their parameters are the same as in Effect mode (
→
p.137).
3. Move the cursor to the various fields in the window, and set the type of
command/effect and the desired parameter values.
If you select COMMAND or FX in the Q-FX popup window, you can monitor the input
signal with the effects applied. It is helpful to actually listen to the sound while you adjust
the parameters.
If you want to edit the effect parameters for FX1–FX4, move the cursor to the field of the
desired effect, and press the [F5] key (EDIT). The parameters are the same as in Effect
mode.
4. When you have finished making settings, press the [F1] key (CLOSE).
Your settings will be finalized, and you will return to the Record page. If you selected
COMMAND or FX in the Q-FX popup window, a check mark will be added to the [F4]
key (Q-FX) display.
5. Use the normal procedure to record the input signal.
The input signal processed by the effect will be recorded. When you have finished record-
ing, access the Q-FX popup window once again, and disable the effects or commands.
To Next Page
Loading...
Need help?
General
