Akai MPC 4000 User Manual

Program mode
214
G Decay field
Adjusts the decay time of the key group or note number.
H Sustain field
Adjusts the sustain level of the key group or note number.
I Release field
Adjusts the release time of the key group or note number.
■ Filter types
The MPC4000 provides the following types of filter.
Hint: When the cursor is located at one of the fields in the AMP block, you can press the [WINDOW]
key to open the Program Modulation popup window.
Sustain
Attack Decay Release
OFF
2-POLE LP 2-POLE LP+ 4-POLE LP
4-POLE LP+ 6-POLE LP
2-POLE BP 2-POLE BP+ 4-POLE BP 4-POLE BP+ 6-POLE 1-POLE HP
1-POLE HP+ 2-POLE HP 2-POLE HP+ 4-POLE HP 4-POLE HP+ 6-POLE HP
LO<>HI LO<>BAND BAND<>HI NOTCH 1 NOTCH 2
NOTCH 3
WIDE NOTCH BI-NOTCH PEAK 1 PEAK 2 PEAK 3 WIDE PEAK
BI-PEAK PHASER 1 PHASER 2 BI-PHASE VOWELISER
TRIPLE

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)