Akai MPC 4000 User Manual

Edit 2 page
215
Edit 2 page
Adjusting the program LFOs and auxiliary envelope
Here you can edit the two LFOs and the envelope used by program modulation.
To access this page ....... [PROGRAM] key → [F2] key (KG MIX) → [F5] key
(EDIT 2)
A Program block
B Kg/Note block
C LFO1 block
D LFO2 block
E AUX ENV block
Functions
• [F1] key (LIST)
Displays the List page.
• [F2] key (KG MIX)
Displays the Key Group Mix page.
• [F3] key (PITCH)
Displays the Pitch page.
• [F4] key (EDIT 1)
Displays the Edit 1 page.
• [F6] key (ZONE)
Displays the Zone page.
Program block
This area shows various information on the currently selected program.
Kg/Note block
Here you can select the key group or note number that you want to edit.
1
2
3
4
5

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)