Akai MPC 4000

Main mode
16
■ Copying a sequence
Here’s how to copy a sequence from memory to an empty sequence.
1. Move the cursor to the Seq field, and press the [WINDOW] key.
The Sequence popup window will appear.
A Sequence name field
Edits the sequence name.
B Default name field
Edits the default sequence name.
C [F1] key (CLOSE)
Closes the popup window.
D [F2] key (DEFAULT)
Registers the various settings of the sequence as the default values for an empty sequence.
E [F4] key (DELETE)
Opens the Delete Sequence window, where you can delete a sequence.
F [F6] key (COPY)
Opens the Copy Sequence window, where you can copy a sequence.
2. Press the [F6] key (COPY).
The Copy Sequence popup window will appear.
A Copy source field
Selects the copy-source sequence.
B Copy destination field
Selects the copy-destination sequence.
C [F1] key (CANCEL)
Closes the popup window.
1
2
34 5 6
1
2
345