Akai MPC 4000 User Manual

Global mode
120
C Type field
Selects the format of the signal that is output from the Digital Out sync jack. You can
select either CONSUMER (consumer devices) or PROFESSIONAL (professional
devices).
D SCSI self ID field
Specifies the SCSI ID of the MPC4000 itself.
E Version field
Indicates the software version of the MPC4000.
Hint: If the optional ADAT interface card is connected, the ADAT (8 assignable) out 1/2 field will be
displayed. In this field you can select the signal that will be output to channels 1/2 of the ADAT interface
card and channels 1/2 of the individual output card. You can select either 1/2 (the signal that is sent
to individual output 1/2) or L/R (the signal that is sent to the [MAIN OUT] jacks).

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)