Load page
109
■ Loading multis
Here’s how to load one or more multi files from a storage device into internal memory.
1. Access the Load page, and move the cursor to the Disk field.
2. Turn the [JOG] dial to open the Disk list popup window.
3. Move the cursor to the storage device from which you want to load the data,
and press the [F6] key (SELECT).
The load-source storage device will be selected.
4. Move the cursor to the view block, and turn the [JOG] dial to select MULTI.
Only multi files will be displayed in the file list block.
● To load an individual multi
5. Move the cursor to the file list block, and select the multi file that you want to
load.
6. Press the [F6] key (DO IT).
The Load a Multi popup window will appear.
A Load field
Specifies how programs/samples used by the multi will be loaded.
B Replace same files in memory field
Specifies what will be done if memory already contains identically-named files (pro-
grams/samples).
C [F1] key (CANCEL)
Cancels the loading operation and closes the popup window.
D [F3] key (CLEAR)
Clears internal memory before loading the data.
E [F5] key (DO IT)
Executes the loading operation.
7. Move the cursor to the Load field, and select one of the following to specify
how the data will be loaded.
MULTI ONLY........................................Only the multi file will be loaded.
WITH PROGRAM AND SAMPLES ....The programs and samples used by that multi
will be loaded with it.
WITH PROGRAMS ..............................Only the programs used by that multi will be
loaded with it. (Samples will not be loaded.)
Hint: By pressing the [F3] key (CLEAR) instead of the [F5] key, you can clear the memory before
loading the programs (or programs+samples).
3 4 5
1
2
To Next Page
Loading...
