Akai MPC 4000 User Manual

Load mode
108
9. To execute the Load operation, press the [F5] key (DO IT).
The program or the program+samples will be loaded. When loading has been completed,
the popup window will close.
● To load multiple programs
10. After step 4, move the cursor to the file list block, and select the folder that
contains the program files you want to load.
11. Press the [F6] key (DO IT).
The Load Folder popup window will appear.
A Load field
Selects the type of file that will be loaded.
B Load with samples field
Specifies whether the samples used by the program will also be loaded.
C Replace same sample in memory field
Specify what will be done if memory already contains identically-named sample data.
D [F1] key (CANCEL)
Cancels the Load operation and closes the popup window.
E [F3] key (CLEAR)
Clears internal memory before loading the data.
F [F5] key (DO IT)
Loads the data.
12. Make sure that the Load field is set to PROGRAMS.
If a different setting is selected, turn the [JOG] dial to select PROGRAMS.
13. Move the cursor to the Load with samples field, and choose one of the following
to specify whether the samples used by the programs will also be loaded.
YES........................Samples will also be loaded.
NO..........................Samples will not be loaded.
14. If you selected YES in step 13, move the cursor to the Replace same sample in
memory field, and choose one of the following to specify what will happen if
memory already contains an identically-named sample.
YES..........................The identically-named sample will be overwritten by the loaded sample.
NO..........................Identically-named sample data will not be loaded.
15. To execute the Load operation, press the [F5] key (DO IT).
When the data has been loaded, the popup window will close.
Hint: By pressing the [F3] key (CLEAR) instead of the [F5] key, you can clear the memory before
loading the program.
Note: Be aware that if you select NO, the programs cannot be played correctly if the memory of the
MPC4000 does not contains the necessary samples.
4 5 6
1
2
3

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)