Load page
111
14. If you selected YES in step 13, move the cursor to the Replace same sample in
memory field, and specify what will be done if internal memory already
contains identically-named data.
YES........................The data will be loaded, overwriting the data in memory.
NO..........................Identically-named data will not be loaded.
15. To load the data, press the [F5] key (DO IT).
When the data has been loaded, the popup window will close.
■ Finding a file
Here’s how you can search for a specific file saved on a storage device, and load it.
1. Access the Load page, and move the cursor to the Disk field.
2. Turn the [JOG] dial to open the Disk list popup window.
3. Move the cursor to the storage device from which you want to load data, and
press the [F6] key (SELECT).
This selects the storage device that will be searched.
4. Press the [F5] key.
The Find File popup window will appear.
A Find field
Specifies the character string you want to find.
B File type field
Selects one of the following to specify the type of file you want to find.
ALL FILES ............All files
MULTI ...................Multi files
PROGRAM............Program files
SAMPLE................Sample files
C [F1] key (CLOSE)
Cancels the operation and closes the popup window.
D [F6] key (FIND)
Executes the search.
5. Move the cursor to the Find field, and turn the [JOG] dial to open the Rename
popup window.
6. Input the character string that you want to find, and press the [F6] key (ENTER).
The character string will be finalized, and the Rename popup window will close.
Hint: By pressing the [F3] key (CLEAR) instead of the [F5] key, you can clear the internal memory
before loading the data.
3 4
2
1
To Next Page
Loading...
Need help?
General
