Main page
15
• Time signature field .... Specify the time signature of the measures that will be
inserted.
If you selected DELETE
• First bar....................... Specify the first measure number that will be deleted.
• Last bar ....................... Specify the last measure number that will be deleted.
If you selected COPY
• From Seq field............. Select the sequence from which you want to copy measures.
• To Seq field................. Select the copy-destination sequence.
• First bar field/Last bar field..........Specify the beginning and end of the measures that
will be copied.
• After bar field/Copies field ..........Specify the measure number at which the measures
will be pasted, and the number of times the mea-
sures will be pasted.
4. To execute the editing operation, press the [F6] key (DO IT).
■ Transposing the entire sequence
Here’s how to transpose all INST type tracks in the sequence. Executing this transpose
operation will rewrite the pitch (note number) of the note events.
1. Move the cursor to the Sequence trans field, and press the [WINDOW] key.
The Transpose Permanent popup window will appear.
A Transpose amount field
Specifies the amount of transposition in a range of –12–+12 semitones.
B Time field
Selects the time axis region for which transposition will occur.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F6] key (FIX)
Executes the transposition.
2. Move the cursor to the Transpose amount field, and turn the [JOG] dial to
adjust the transpose amount.
3. Move the cursor to the left side of the Time field, and turn the [JOG] dial
specify the location where transposition will start.
4. Move the cursor to the right side of the Time field, and turn the [JOG] dial
specify the location where transposition will end.
5. To execute the transposition, press the [F6] key (FIX).
Note: This transpose operation will affect only INST type tracks.
2
1
34
To Next Page
Loading...
Need help?
General
