Akai MPC 4000 User Manual

Main mode
28
■ Erasing all muted tracks
Here’s how to erase all tracks for which muting is currently turned on.
1. Check the muted status of the tracks in the sequence.
2. Move the cursor to the Mute field, and press the [WINDOW] key.
The Erase All Muted Tracks popup window will appear.
A [F1] key (CANCEL)
Cancels the operation and closes the popup window.
B [F6] key (DO IT)
Execute the erasure.
3. To execute, press the [F6] key (DO IT).
■ Making program change transmission settings
Here’s how to make settings related to program change transmission, such as selecting
the program change number that is sent to the output destination of a track, and enabling
or disabling transmission of program change events recorded within a track.
1. Move the cursor to the Pgm Change field, and press the [WINDOW] key.
The Program Change popup window will appear.
A Bank select field
Switches transmission on/off for bank select messages.
B MSB field
Specifies the bank select MSB (control change #0) value that will be sent to the output
destination of the track.
C LSB field
Specifies the bank select LSB (control change #32) value that will be sent to the output
destination of the track.
D Program change field
Specifies the program change number that will be sent to the output destination of the
track.
12
1
5
6
4
2
3

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)