Main mode
26
4. Move the cursor to the Default name field, and turn the [JOG] dial to input the
default name.
5. Press the [F2] key (DEFAULT).
The track settings and track name will be memorized as the default settings for that track
number.
6. To end the procedure and close the popup window, press the [F1] key (CLOSE).
■ Changing the track number
Here’s how to change the track number of a track to a different track number in the sequence.
1. Move the cursor to the Trk field, and press the [WINDOW] key.
The Track popup window will appear.
2. Press the [F5] key (SORT).
The Change Track Order popup window will appear.
A Seq field
Indicates the sequence that is selected for operations.
B Track field
Indicates the track numbers/track name that are included in the sequence selected in the
Seq field (
1).
C Type field
Indicates the type and output destination of the track.
D [F1] key (CLOSE)
Cancels the operation and closes the popup window.
E [F6] key (SELECT)
Selects the track.
3. Move the cursor to the Track field, and turn the [JOG] dial to select the track
that you want to move.
4. Press the [F6] key (SELECT).
That track will be selected. When you select the track, the function of the [F6] key will
change to INSERT.
Hint: This procedure will not affect tracks in which events have already been recorded.
If you hold down the [SHIFT] key and press the [F2] key, the state of the currently selected track will
be memorized as the default setting for all empty tracks.
1 3
4
2
5
To Next Page
Loading...
Need help?
General
