Akai MPC 4000 User Manual

List page
163
Sample mode
List page
Viewing the sample list
Here you can view a list of the samples that are currently in memory. In this page you can
also copy or delete samples.
To access this page ....... [SAMPLE] key → [F1] key (LIST)
A
List block
Functions
• [F2] key (TRIM/LP)
Displays the Sample mode Trim/Loop page.
• [F3] key (REGION)
Displays the Sample mode Region page.
• [F4] key (Q-FX)
Displays the Quick FX popup window, where you can apply effects to a previ-
ously-recorded sample and resample it.
List block
A
Tag field
Tags the desired sample(s).
B Sample field
Lists the names of the samples currently in memory. Newly recorded samples and sam-
ples that you edited after they were last loaded or saved will be indicated by a * symbol
in front of their name. At the right of the sample name, the status of the sample is shown
by ST (stereo sample), MN (monaural sample), and LP (loop playback ON) indicators.
C
Sampling rate/Bit field
Indicates the sampling rate and bit depth (resolution) of the sample.
1
2 3
1

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)