Main mode
14
J [F5] key (NOW)
Inserts a tempo change event at the current location of the sequence.
K [F6] key (INSERT)
Inputs a tempo change event at the same location as the selected event.
2. Move the cursor to the Tempo change field, and turn the [JOG] dial to switch it
on.
When the Tempo change field is on, the tempo change events you specify in this popup
window will be valid.
3. Move the cursor to any row of the Location field, and press the [F6] key
(INSERT).
A tempo change event will be input at the same location as the selected event.
4. Use the [JOG] dial and the CURSOR[
√
]/[
®
] keys to specify the location
(measure/beat/tick) at which you want to input the tempo change.
5. Move the cursor to the Tempo field, and turn the [JOG] dial to specify the
tempo value that you want to insert.
6. If you want to delete a tempo change event that you inserted, move the cursor
to the corresponding event, and press the [F4] key (DELETE).
7. When you have finished inputting tempo change events, press the [F1] key
(CLOSE) to close the popup window.
■ Cutting/inserting/copying measures of a sequence
Here’s how to cut/insert/copy measures of a sequence.
1. Move the cursor to the Bars field, and press the [WINDOW] key.
The Edit Bars popup window will appear. In this popup window, you can insert measures
into the sequence, or cut or copy the sequence data in measure units.
2. Move the cursor to the Edit field, and turn the [JOG] dial to select one of the
following editing methods.
INSERT..................Insert blank measures at the desired location.
DELETE ................Delete a specified range of measures.
COPY.....................Copy measures from any sequence.
3. Turn the [JOG] dial to set the various fields in the popup window, according to
the editing method you selected.
If you selected INSERT
• After bar field ..............Specify the measure number at which the measures will be
inserted.
The measures will be inserted after the measure you select
here.
• Number of bars field....Specify the number of measures that will be inserted.
Hint: If you press the [F5] key (NOW) instead of the [F6] key, the tempo change event will be input
at the current location of the sequence.
Hint: You cannot input the tempo change before or after the preceding or following tempo change.
To Next Page
Loading...
Need help?
General
