Akai MPC 4000 User Manual

Next Sequence function
242
4. If you want to switch immediately to the next sequence, strike a pad to select
the next sequence and then press the [F3] key (SUDDEN).
When you press the [F3] key (SUDDEN), you will move immediately to the sequence
shown in the Next field, even if the previous sequence had not finished playing.
You can also switch sequences immediately by holding down the [F3] key (SUDDEN)
and striking a pad.
5. If you want to hold the currently-playing sequence, press the [F4] key (HOLD).
The function display will be highlighted, and the current sequence will play back repeat-
edly. During this time, it will not be possible to switch sequences from the pads. To defeat
the Hold function, press the [F4] key (HOLD) once again.
6. To stop sequence playback, press the [STOP] key.

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)