Akai MPC 4000 User Manual

Load mode
112
7. Move the cursor to the File type field, and turn the [JOG] dial to select the type
of file that you want to find.
8. To execute the search, press the [F6] key (FIND).
When the file search has been completed, the Found Files popup window will appear.
A File list
Displays the files that match the search conditions.
B [F1] key (CLOSE)
Closes the popup window without loading data.
C [F5] key (LOAD)
Loads the file that is selected in the file list.
9. Turn the [JOG] dial to select the file you want to load.
10. Press the [F6] key (LOAD) to load the data.
Depending on the type of file that you are loading, a popup window may appear, allowing
you to make various settings. For details, refer to the explanations on how to load each
type of file.
2 3
1

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)