Akai MPC 4000

Main page
19
B Copy destination field
Selects the copy-destination track.
C Mode field
Specifies whether any data existing in the copy-destination track will be overwritten
(REPLACE), or merged with the copied data (MERGE).
D [F1] key (CANCEL)
Closes the popup window.
E [F5] key (DO IT)
Executes the copy.
3. Move the cursor to the Copy source field, and turn the [JOG] dial to select the
copy-source track.
4. Move the cursor to the Copy destination field, and turn the [JOG] dial to select
an empty track.
5. To execute the copy, press the [F5] key (DO IT).
If desired, a track that already contains MIDI data may be selected as the copy-destina-
tion. In this case, use the Mode field to select REPLACE (overwrite) or MERGE (com-
bine), and then press the [F5] key (DO IT).
■ Deleting a track
Here’s how to delete a specific track from the sequence.
1. Move the cursor to the Trk field, and press the [WINDOW] key.
The Track popup window will appear.
2. Press the [F4] key (DELETE).
The Delete TRACK popup window will appear.
A Delete track field
Selects the track that will be deleted.
B [F1] key (CANCEL)
Cancels the operation and closes the popup window.
C [F3] key (DEL ALL)
Opens the Delete ALL Tracks popup window, where you can delete all tracks of the cur-
rently selected sequence. When this popup window is displayed, you can press the [F6]
key (DO IT) to delete the entire sequence.
D [F6] key (DO IT)
Executes the track deletion.
3. Move the cursor to the Delete track field, and turn the [JOG] dial to select the
track that you want to delete.
1
23 4