Akai MPC 4000 User Manual

Pitch page
207
Pitch page
Specifying the tuning or zone of a key group or note number
Here you can specify the playback pitch, note range, and polyphony etc. for a key group
or note number.
To access this page ....... [PROGRAM] key → [F2] key (KG MIX) → [F3] key
(PITCH)
A Program block
B Sample list block
Functions
• [F1] key (LIST)
Displays the List page.
• [F2] key (KG MIX)
Displays the Key Group Mix page.
• [F4] key (EDIT 1)
Displays the Edit 1 page.
• [F5] key (EDIT 2)
Displays the Edit 2 page.
• [F6] key (ZONE)
Displays the Zone page.
Program block
This area shows various information about the currently selected program.
1
2
1
2

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)