List page
125
3. Move the cursor to the New name field, and turn the [JOG] dial.
The Rename popup window will appear.
4. Input the desired name for the multi that will be created, and press the [F6] key
(ENTER).
The name will be finalized, and the popup window will close.
5. Move the cursor to the Number of parts field, and specify the number of parts
that the multi will include.
You may change the number of parts later if you wish.
6. To create the multi, press the [F6] key (DO IT).
The popup window will close, and you will return to the list page. The newly-created
multi will be added to the multi list.
■ Copying a multi
Here’s how to copy a specific multi within memory.
1. Move the cursor to the multi field in the List page, and press the [WINDOW]
key.
The Multi popup window will appear.
2. Press the [F6] key (COPY).
The Copy Multi popup window will appear.
A Copy source field
Selects the copy-source multi.
B New name field
Assigns a name for the copied multi.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F5] key (DO IT)
Executes the copy.
3. Move the cursor to the Copy source field and turn the [JOG] dial to select the
copy-source multi.
4. Move the cursor to the New name field and turn the [JOG] dial to access the
Rename popup window.
5. Assign a desired name for the copy-destination multi and press the [F6] key
(ENTER).
The popup window will close.
6. To execute the copy, press the [F5] key (DO IT).
The copy will be executed, and the popup window will close.
2
1
3
4
To Next Page
Loading...
Need help?
General
