Akai MPC 4000 User Manual

Program mode
194
■ Copying a program
Here’s how to copy a specific program within memory.
1. In the List page, move the cursor to the Program field and press the [WINDOW]
key.
The Program popup window will appear.
2. Press the [F6] key (COPY).
The Copy Program popup window will appear.
A Copy source field
Selects the copy-source program.
B New name field
Specifies a name for the newly created program.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F5] key (DO IT)
Executes the Copy operation.
3. Move the cursor to the Copy source field, and turn the [JOG] dial to select the
copy-source program.
4. Move the cursor to the New name field, and turn the [JOG] dial to open the
Rename popup window.
5. Assign a name to the program that will be created, and press the [F6] key
(ENTER).
The popup window will close.
6. To execute the copy, press the [F5] key (DO IT).
The copy will be executed, and the popup window will close.
1
2
3 4

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)