Load page
103
SEQUENCE...........Only sequence files will be displayed.
MULTI ...................Only multi files will be displayed.
PROGRAM............Only program files will be displayed.
SAMPLE................Only sample files will be displayed.
ALL........................Only ALL files will be displayed.
Memory block
This area indicates the free space within the MPC4000’s internal memory.
A Wave free field
Indicates the amount of free space in sample memory.
B Sequence free field
Indicates the amount of free space in sequencer memory.
C CPU free field
Indicates the amount of free space in system memory.
■ Loading an ALL file
Here’s how to load an ALL file (all sequences and songs) from a storage device into
memory.
1. Access the Load page, and move the cursor to the Disk field.
2. Turn the [JOG] dial to open the Disk List popup window.
3. Move the cursor to the storage device from which you want to load data, and
press the [F6] key (SELECT).
The load-source storage device will be selected.
4. Move the cursor to the view block, and turn the [JOG] dial to select ALL.
Only ALL files will be displayed in the file list block.
5. Move the cursor to the file list block, and select the ALL file that you want to
load.
6. Press the [F6] key (DO IT).
The Load ALL (songs and sequences) File popup window will appear.
Note: When you load an ALL file, all sequences and songs that were in memory will be lost. Use this
operation with care.
1 2
3
1 2 3
To Next Page
Loading...
Need help?
General
