List page
127
■ Assigning a multi number to a multi
Here’s how to assign a multi number to a multi so that you can use MIDI events to select
that multi from memory.
1. In the List page, move the cursor to the Multi No. field of the multi to which
you want to assign a number.
2. Turn the [JOG] dial.
The Multi Number popup window will appear.
A Multi field
Indicates the name of the multi for which you will assign a number.
B Multi number field
Specifies the multi number.
C Multi Select field
Specifies the MIDI event used to select this multi.
D Multi select channel field
Specifies the MIDI channel used to select this multi.
E [F1] key (CLOSE)
Updates the setting and closes the popup window.
3. Move the cursor to the Multi Select field, and turn the [JOG] dial to select one
of the following MIDI events that will be used to switch multis.
PROGRAM CHANGE .... Program changes
BANK SELECT............... Control change #0
OFF .................................. No MIDI event is assigned.
4. Move the cursor to the Multi select channel field, and turn the [JOG] dial to
select the MIDI channel that will be used to switch multis.
5. Move the cursor to the Multi number field and turn the [JOG] dial to select the
multi number.
6. To update the setting, press the [F1] key.
Now you can select this multi by using the MIDI event/MIDI channel you specified in
the Multi Select and Multi select channel fields.
5
1
2
3
4
To Next Page
Loading...
Need help?
General
