Main page
31
■ Naming the external devices connected to the MIDI OUT connectors
You can assign a name to the external device(s) connected to the [MIDI OUT A]–[MIDI
OUT D] connectors. A separate device name can be specified for each MIDI channel.
1. Access the Main page, and make sure that the Out1 field is set in the range of
MIDI A–D.
2. Move the cursor to the Device field, and press the [WINDOW] key.
The Device List popup window will appear.
A Out field
Selects the MIDI connector A–D for which you want to edit the device names.
B MIDI channel
Displays MIDI channels 1–16 for the MIDI connector you selected in the Out field.
C Device names
Displays the device names for MIDI channels 1–16.
D [F1] key (CLOSE)
Finalizes the settings and closes the popup window.
3. Move the cursor to the Out field, and turn the [JOG] dial to select the MIDI
connector that is connected to the device(s) you want to name.
4. Move the cursor to the device name you want to edit, and turn the [JOG] dial.
The Rename popup window will appear.
5. Use the CURSOR[
√
]/[
®
]keys, [JOG] dial, and panel keys to edit the device
name, and press the [F6] key (ENTER).
6. In the same way, edit the device names for the other MIDI channels.
7. When you are finished editing the device names, press the [F1] key (CLOSE) to
close the popup window.
1 2 3
4
To Next Page
Loading...
Need help?
General
