Global mode
114
D
Time field
Displays the time of the internal clock. When you move the cursor to this field and turn
the [JOG] dial or press the [WINDOW] key, the Set Date/Time popup window will
appear.
E
Item sort field
Selects the order in which items will be shown when you view a list of files. You can
select NAME (sort by name) or CHRONIC (sort by order in which the data was written).
System clock block
Here you can set the system clock of the MPC4000.
A
System clock field
Indicates the frequency of the clock by which the MPC4000 operates. When you turn the
[JOG] dial, the Change System Clock popup window will appear.
• System Clock field
Specifies the frequency of the clock by which the MPC4000 will operate. You can
select 44.1 kHz, 48 kHz, or 96 kHz.
• [F1] key (CANCEL)
Cancels the operation and closes the popup window.
• [F6] key (DO IT)
Finalizes the settings.
Note:
When you change the system clock setting, the MPC4000 will automatically restart, and all data
in memory will be lost at this time. If memory contains data that you want to keep, you must use Save
mode to save your data to a hard disk etc. before you change the system clock setting. The new word
clock setting will take effect after the system is restarted.
1
To Next Page
Loading...
Need help?
General
