Akai MPC 4000 User Manual

List page
191
Program mode
List page
Viewing a list of programs in internal memory
Here you can view a list of the programs that are in internal memory.
To access this page ....... [PROGRAM] key → [F1] key (LIST)
A Program list block
Functions
• [F2] key (KG MIX)
Displays the Key Group Mix page.
• [F3] key (MISC.)
Displays the MISC. page
• [F4] key (ASSIGN)
Displays the Assign page.
Program list block
This area lists the programs that are in internal memory.
A Tag field
Tags the desired program(s).
B Program field
Lists the programs that are currently in memory. Newly created programs or programs
that you edited after last loading or saving them are indicated by a * symbol.
If you move the cursor to this field and press the [WINDOW] key, the Program popup
window will appear, allowing you to create or delete programs.
C Program No. field
Indicates the program change number that is assigned to each program.
If you move the cursor to this field and turn the [JOG] dial, the Program number popup
window will appear, allowing you to assign a program change number to the program.
1
1 2 3

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)