Akai MPC 4000 User Manual

Foot switch page
121
Foot switch page
Making foot switch settings
Here you can select the functions of the foot switches connected to the [FOOT SWITCH
1] and [FOOT SWITCH 2] jacks.
To access this page ....... [GLOBAL] key → [F4] key (FOOT SW)
A Setting block
Functions
• [F1] key (GLOBAL)
Displays the Global page.
• [F2] key (MEMORY)
Displays the Memory page.
• [F3] key (CONFIG.)
Displays the Configuration page.
• [F6] key (DETECT)
Detects the polarity of the connected foot switches
Setting block
Here you can assign various functions to the foot switches.
A Function 1 field
Selects one of the following functions for the foot switch connected to the [FOOT
SWITCH 1] jack.
• PLAY START............. The same function as the [PLAY START] key.
• PLAY .......................... The same function as the [PLAY] key.
• STOP........................... The same function as the [STOP] key.
• REC+PLAY ................ The same function as holding down the [REC] key and press-
ing the [PLAY] key.
• ODUB+PLAY............. The same function as holding down the [OVER DUB] key
and pressing the [PLAY] key.
• REC/PUNCH.............. If stopped, performs Play. If playing, performs Punch-in. If
recording, performs Punch-out.
1
1
2

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)