Akai MPC 4000 User Manual

Multi mode
134
Span page
Specifying the range of notes played by each part
Here you can view a list of the parts within the currently selected multi, and specify the
range of notes that each part will play.
To access this page........[MULTI] key → [F4] key (SPAN)
A Multi block
B Part list block
Functions
• [F1] key (LIST)
Displays the List page.
• [F2] key (MIX)
Displays the Mix page.
• [F3] key (MIDI)
Displays the MIDI page.
• [F5] key (MUTE)
Mutes the part that is selected in the part list.
• [F6] key (SOLO)
Solos the part that is selected in the part list.
Multi block
This area indicates the currently selected multi.
Part list block
Here you can specify the key span (range of notes) played by each part of the selected
multi.
A Part field
Shows the part numbers. If you move the cursor to this field and press the [WINDOW]
key, the Part popup window will appear.
1
2
12 34 5

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)