Main mode
10
A Current bars field
Displays the current number of measures.
B New bars field
Specifies the number of measures to which the sequence will be changed.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F4] key (BAR EDIT)
Displays the Edit Bars popup window, where you can edit the sequence in units of measures.
E [F6] key (DO IT)
Finalizes the changes you have made.
4. Move the cursor to the New bars field, turn the [JOG] dial to select the number
of measures, and press the [F6] key (DO IT) to finalize the setting.
When you finalize the number of measures, the popup window will close.
5. To change the time signature of the sequence, move the cursor to the time
signature field, and turn the [JOG] dial.
The Change Time Signature popup window will appear.
A Measure number
Displays the measure numbers within the sequence.
B Time signature field
Specifies the time signature of the sequence.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F6] key (DO IT)
Executes the time signature change.
6. Move the cursor to the time signature field, turn the [JOG] dial to specify the
time signature, and press the [F6] key (DO IT).
You can set the time signature in a range of 1/4–16/4, 1/8–16/8, 1/16–16/16, or
1/32–32/32. When you execute, the popup window will close.
12
345
1
34
2
To Next Page
Loading...
Need help?
General
