Sequence edit mode
38
A Track field
Turn the [JOG] dial to select the track that you want to edit. If you move the cursor to this
field and press the [WINDOW] key, the Track popup window will appear.
B Tempo field
Specifies the tempo of the sequence. If you move the cursor to this field and press the
[WINDOW] key, the Tempo Change popup window will appear.
C SEQ/MAS field
Selects the timing source of the sequence.
D Timing correct field
Specifies the timing correct setting. If you move the cursor to this field and press the
[WINDOW] key, the Timing Correct popup window will appear.
E Swing field
Modifies the amount of swing. This field will be displayed only if the Timing correct field
is set to a value of 1/8 or 1/16. If you move the cursor to this field and press the [WIN-
DOW] key, the Timing Correct popup window will appear.
Now block
This area indicates the current location within the sequence.
A Now field
Indicates or changes the current location within the sequence.
Graphic editor block
This area provides a graphic display of the MIDI events recorded in the track. The con-
tents of the display will depend on the type of track you are editing, and on the type of
MIDI events that are shown.
Matrix display
This block will appear if you select NOTES in the View field for a DRUM type track.
A Time ruler
Displays the time axis of the track. The numbers above the ruler are the measure num-
bers. The markings in the ruler are the minimum units by which you can select events to
be edited. Use the Timing Correct field to specify the resolution of these markings.
Hint: When the cursor is located in the graphic editor, use the CURSOR[
√
]/[
®
]/[
π
]/[
†
] keys to
select the editing location or region. To move the cursor to a different block, use the BLOCK CURSOR
[
π
]/[
†
] keys.
1
1
2
45
3
To Next Page
Loading...
Need help?
General
