Akai MPC 4000 User Manual

Sequence edit mode
44
The screen will switch to the piano-roll display, and various fields will appear, allowing
you to specify the move-destination of the MIDI event(s), and how the move will be han-
dled.
A Move field
Selects the direction in which the data will be moved.
B From field
Indicates the current location of the move-source MIDI event. If you have selected mul-
tiple MIDI events, this indicates the location of the first event. If the Move field (
1) is
set to NOTE, this selects the note number.
C to field
Specifies the move-destination location. If you have selected multiple MIDI events, this
indicates the move-destination of the first event. If the Move field (
1) is set to NOTE,
this selects the note number.
D Mode field
Selects how processing will be performed if note events exist in both the move-source
and move-destination.
E [F1] key (CANCEL)
Cancels the operation and returns the block to the normal display.
F [F2] key (DO IT)
Executes the MIDI event Move operation.
G [F3] key (–)
Moves the selected region toward the beginning of the track, in steps of one tick.
H [F4] key (+)
Moves the selected region toward the end of the track, in steps of one tick.
5. Move the cursor to the Move field, and turn the [JOG] dial to select one of the
following ways in which the data will be moved.
TIME......................Move along the time axis (left/right)
NOTE.....................Move the note number (up/down)
You will be able to select NOTE only if you have selected note events in an INST type
track.
6. Move the cursor to the to field, and specify the move-destination for the MIDI
events.
7. As necessary, move the cursor to the Mode field, and select one of the following
to specify how processing will be performed if note events exist in both the
move-source and move-destination.
MERGE..................Existing note events will remain, and the move-source note events
will be added.
REPLACE..............Existing note events will be erased, and overwritten by the
move-source events.
8. Press the [F2] key (DO IT) to execute the move.
5
2
1
34
678

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)