Step edit page
53
Event list block
This displays an event list showing the MIDI events recorded in the track.
A Event list
Shows the MIDI events recorded in the track. The event at which the cursor is located is
selected for editing. You can select multiple events by holding down the [SHIFT] key and
pressing the CURSOR [
π
]/[
†
] keys.
B Time field
Shows the location at which each MIDI event is recorded, in measures/beats/ticks.
C Channel field
Shows the MIDI channel of each MIDI event in the track. This field will be displayed
only if a MIDI connector or an internal virtual port is selected as the output destination
of the track, and the output destination MIDI channel is set to ANY.
D Event field
Shows the type of each recorded MIDI event, and its value(s). The following MIDI events
may be shown here.
Note events
From the left, these are the note number, D (duration), and V (velocity) fields.
Pitch bend
The value is displayed at the right.
Program change
The value is displayed at the right.
Control change
From the left, these are the C:XXX (control change number), value, and bar fields.
Channel key pressure
From the left, these are the value and bar fields.
Hint: When the cursor is located in the event list, you can use the CURSOR [
π
]/[
†
] keys to select
the event or region that you want to edit. Use the BLOCK CURSOR [
π
]/[
†
] keys to move the cursor
to a different block.
1
23
4
To Next Page
Loading...
Need help?
General
